ZT42063T070000Z TT Printer ZT420 6'', 300 dpi, Taiwanese Cord, Serial, USB, 10/100 Ethernet, Bluetooth 2.1/MFi, USB Host, EZPL ZT41043T070000Z TT Printer ZT410 4'', 300 dpi, Taiwanese Cord, Serial, USB, 10/100 Ethernet, Bluetooth 2.1/MFi, USB Host, EZPL ZT42062T470000Z TT Printer ZT420 6'', 203 dpi, Taiwanese Cord, Serial, USB, 10/100 Ethernet, Bluetooth 2.1/MFi, USB Host, Peel w/ Full Rewind, EZPL ZT42062T070000Z TT Printer ZT420 6'', 203 dpi, Taiwanese Cord, Serial, USB, 10/100 Ethernet, Bluetooth 2.1/MFi, USB Host, EZPL ZT41042T070000Z TT Printer ZT410 4'', 203 dpi, Taiwanese Cord, Serial, USB, 10/100 Ethernet, Bluetooth 2.1/MFi, USB Host, EZPL Once this read functionality is confirmed, you should be able to successfully print and encode your tags with the Zebra ZT410 RFID printer.ZT42062T010000Z TT Printer ZT420 6'', 203 dpi, US Cord, Serial, USB, 10/100 Ethernet, Bluetooth 2.1/MFi, USB Host, EZPL To verify that the settings are correct, navigate to RFID -> Read RFID Data and select "Read" to ensure that each tag responds with its EPC as it is fed through the printer. Detailed steps can be seen in the video Setting Up Your Zebra ZT410 Printer. Next, you will need to initiate an RFID calibration by navigating to the RFID option on the printer's home menu. To do this, please refer to our video on How to Manually Calibrate the Zebra ZT410 Printer. If your tags are not feeding out one at a time, you will need to perform a full media calibration. Once these settings have been adjusted, you should be able to feed one tag at a time when the print head is closed and the feed button is pressed on the printer. Typically, this sensor will need to be placed so that it will pass under the part of the tag with the most surface area (for the Gap sensor), or the part of the tag with the black mark (for the Mark sensor). Please see the video in Setting Up Your Zebra ZT410 Printer for more information on where to place the red laser sensor for your particular tag. These settings can be adjusted in the Settings -> Media Type settings menu. If your tags have both a gap and a mark, either setting can be used. If your tags are separated by a either a gap or notch in the print media, set the printer settings to use the "Gap Sensor" settings. If your tags have a black mark or line on the underside of the print media, you will need to change the printer settings to use the "Mark Sensor". To do this, you will need to determine if your tags require the "Mark Sensor", or the "Gap Sensor". First, verify that the printer is "seeing" the tags correctly. If you are having trouble printing your tags, there are a few steps you can take to try and resolve any errors you may be seeing.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |